In today’s world, the scope is wide enough for what a 3-dimensional model of a product might require. Even before a simpler product or just the production of a prototype, it may be necessary for certain decisions to be made based on the completed model. A dynamically evolving branch of this is 3D printing, where the 3-dimensional model is printed as a prototype. It is also conceivable that a custom-made piece of furniture may need to be modified after the 3D display to make the actual production already appropriate. Another big area is advertising, marketing uses. Then a 3-dimensional model can be placed in an environment, or animations can be created in this way, which in reality would be feasible only at a much higher cost or not at all. Nowadays, it is expected in almost all areas that advertisements also include virtual elements in order to enhance the visibility and attract attention. In addition, 3D models are also needed to create computer games and applications that can now be run not only on desktops but even on phones. It can be seen that the scope of use of 3-dimensional models is quite wide and is expanding.

Unfortunately, not all 3D models can be used for 3D printing. Moreover, it can be said that only a very small part of them are suitable for it. This is because 3D printing has its own requirements and rules. If we only use a box in a visualization, for example, the wall thickness of the box there can be almost zero because it doesn’t really affect any factors. A 3D printer, on the other hand, has to make some thickness, and there’s even the issue of stability. For the object, in this case a box, must be able to bear its own weight, and possibly even more in reality. For more complex objects, there should be no accidental overlap of two surfaces, as this will not be able to be interpreted by the printer, while also for a visualization, this is not a particular problem, especially if it is not in such a spectacular location. These are just two of the factors that show that if you need to create a 3D Model for printing, you need to start the process differently.

Yes, we can make 3D models that are suitable for 3D printing, but as described in the previous section, it is absolutely necessary to know from the beginning that this will be the purpose of use. Since these models have to meet several conditions, they must be created by focusing on them from the very beginning.

For visualizations usually are used some of existing 3D models. Of course, it is inevitable that we also have to create models individually. The number of these depends on what needs to be displayed and how many unique models the customer wants to see on the visuals again. In the external modeling of a house, the design of the walls are different in each case so this must always be created individually, as well as the corresponding roof. This is always the case for such tasks. The question rather is how many objects or landmarks will be included in the visualization that can only be arranged with custom-made models due to local conditions and sizes.

In the case of 3D printing, of course, the customer must receive the 3D model because he must continue to work with it.
However, when ordering a visual design, animation or other service, not in the general case. Usually, you only get the created images or videos that contain that 3D model. Unless otherwise mentioned, this is always the case. If for visualization you want to get the 3D model as well, for this you need a separate agreement with us. In this case please inform us in advance because we have to create the models accordingly.

In addition to the topic of 3D printing, it is important to work with high-quality 3D models, because the quality of the visual design or animation are created also depends on it. If animation, it is worthwhile to mention the structure and surface of the created model. The good geometry is even more pronounced because here parts of the 3d models sometimes stretch or shrink during the process. If the geometry of the created model is not correct it can also cause surface defects, which can ruin the whole job. In general, a model consisting of an ideal 3-dimensional spatial score or surface number should be created in which further subdivision of the surfaces only refines the appearance of the object but does not cause a change in its basic geometry. This allows even closer images of the model to be taken without significant additional modeling. In addition to this criterion, the number of pixels that make up the model should be kept to a minimum so that computers are not overburdened during the final rendering of the images, as this affects resource requirements and time spent.
However, it is very important to emphasize that a 3D Model will be accurate and photorealistic if the actual reference or available documentations, pictures are accurate.

The price of a 3D model depends on what, how and for what purpose it should be modeled. In terms of complexity, it doesn’t matter if a ball needs to be modeled or a vehicle. These two models have almost no comparable difference in time. And the goal often determines how. For example, you need to create a low-polygon model for a game program or a model for 3D printing mentioned earlier.
If you have an idea of what you want to make, contact us and we'll make you a personalized quote.